Elevator guide rail frame
The elevator guide rail frame is used to support and fix the guide rail, which is installed on the shaft wall or beam. It fixed the space position of the guide rail and withstood various actions from the guide rail.
Elevator guide rail frame is divided into different uses (1) car guide rail frame (2) counterweight guide rail frame (3) car and counterweight common guide rail frame
Elevator guide rail frame is divided into integral structure and combined structure
According to the shape, the elevator guide rail frame is divided into (1) mountain type guide rail frame (2) angle type guide rail frame (3) frame type guide rail frame
The distance between the two guide rails should be 1.5-2.00 m and not more than 2.5 M. the distance between the guide rails and the connecting plates of the guide rails should be greater than 2,50 mm, Generally, the installation is not affected. The guide rail frame shall be fixed and reliably connected with the shaft wall
(1) embedding steel plate, which is suitable for reinforced concrete shaft, safe, convenient, firm and reliable. The method is to embed 16-20 mm thick steel plate into the shaft wall, weld the steel bar on the back of the steel plate and the framework reinforcement firmly, and directly weld the guide rail bracket to the steel plate during installation
(2) for direct burial, the guide rail frame shall be positioned according to the plumb line, and the dovetail of the guide rail bracket shall be directly buried into the reserved hole or the hole drilled in place, and the embedding depth shall not be less than 120mm
(3) embedded anchor bolt
(4) common guide rail frame
(5) fixation with opposite bolts
(6) embedded steel hook
